Performing an oil change on your Volvo XC90 is essential for maintaining engine health and ensuring smooth performance. With Everyday Volvo tips, you can confidently handle this routine maintenance task yourself, saving time and money.

What You'll Need

  • New oil filter
  • Correct grade and amount of engine oil (check your owner’s manual)
  • Oil drain pan
  • Socket wrench
  • Oil filter wrench
  • Funnel
  • Rags or paper towels
  • Car jack and stands (if needed for access)

Step-by-Step Oil Change Process

  1. Warm up the engine for a few minutes to help drain oil smoothly.
  2. Lift the vehicle safely using a jack and stands if you need extra clearance.
  3. Locate the oil drain plug under the engine and place the drain pan beneath it.
  4. Use a socket wrench to carefully remove the drain plug and let the old oil drain out completely.
  5. Remove the old oil filter using the oil filter wrench. Be prepared for some oil to spill.
  6. Lubricate the rubber seal on the new oil filter with a bit of fresh oil, then install it by hand until snug.
  7. Replace the oil drain plug and tighten securely without over-tightening.
  8. Open the hood and add the new engine oil using a funnel. Check the level with the dipstick to avoid overfilling.
  9. Start the engine and let it run for a few minutes, then check for leaks and recheck oil level.
  10. Dispose of the used oil and filter responsibly at a recycling center.

Following these Everyday Volvo tips ensures your Volvo XC90 stays in top condition, extending engine life and improving fuel efficiency. Regular oil changes are a key part of your vehicle’s maintenance schedule, so keep track and perform them as recommended.