Lowering your Volvo S80 can enhance both its appearance and handling, giving it a sportier stance and improved road grip. Using OEM-compatible suspension kits ensures you maintain the quality and reliability Volvo is known for, while achieving a lowered ride height.

Tools and Materials Needed

  • OEM-compatible lowering springs or coilover kit
  • Jack and jack stands
  • Socket set and wrenches
  • Torque wrench
  • Spring compressor (if necessary)
  • Wheel chocks
  • Penetrating oil

Step-by-Step Lowering Process

  1. Prepare the Vehicle: Park on a flat surface, engage the parking brake, and place wheel chocks behind the rear wheels.
  2. Lift the Car: Use a jack to raise the front or rear of the vehicle and secure it on jack stands.
  3. Remove Wheels: Take off the wheels to access the suspension components.
  4. Detach Suspension Components: Apply penetrating oil to bolts, then carefully remove the existing springs and shocks or struts.
  5. Install Lowering Kit: Fit the OEM-compatible lowering springs or coilovers according to the kit instructions. Use a spring compressor if necessary.
  6. Reassemble and Tighten: Reattach all components and torque bolts to manufacturer specifications.
  7. Lower the Vehicle: Remove jack stands and carefully lower the car back to the ground.
  8. Test Drive and Alignment: Take a short test drive to check handling, then have the suspension professionally aligned.

Following these steps with OEM-compatible parts ensures your Volvo S80 retains its safety and reliability while enjoying a more aggressive look and improved performance. Always consult your vehicle’s manual or a professional if you’re unsure about any step.